Titebond III Ultimate Wood Glue Whats New

Immediate. Professional. Results.

Although our core Titebond Wood Glue product line is ideal for a vast majority of woodworking applications, we realize that there is a growing need for faster, and in some cases “instant”, adhesion capabilities. For this reason, we now offer the Titebond Instant Bond line of ethyl-cyanoacrylate-based wood adhesives, complete with an adhesive activator that accelerates the bonding process.

Titebond Instant Bond is a two-part bonding system that takes between 5 – 15 seconds to set and 30 – 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

The Performance You Expect
From Titebond® Wood Glues...
Without The Wait.

Heather Dages of Franklin International talks to Popular Woodworking Magazine
about the new Titebond Instant Bond Wood Adhesives at the 2008 IWF show.

Performance Benefits
Cyanoacrylate

Key performance benefits over other cyanoacrylate (CA)
products on the market today:

2-year shelf life • • • Domestic production = fresher material
Superior quality • • • Triple-distilled for purity & consistency
Incredible strength • • • Over 4,000 psi tensil shear strength
Impact-resistant • • • More flexible & less brittle
Service temperature range • • • From - 65°F. to +200°F.
Adhesive use only • • • Thin formula does NOT require activator
No-clog applicator • • • Easy to use & reduces waste

	Our Instant Bond Family Just the Facts
Our pure, high-quality cyanoacrylate (CA) adhesives are available in four viscosities, depending on the application or the MIL specification required. Instant Bond Activator, a heptane-based formula, reduces the set time and cure time by nearly 50%. It is designed for “immediate” bonds, larger gaps, very porous wood and bridge bonding joints.

Titebond® Instant Bond Wood Adhesives (Cyanoacrylate)
Type	Viscosity	Gap Fill	Assembly Time	Cure Speed*	MIL Specs (A46050C)
Thin	5 cps	0.002	5 seconds	3 seconds	Type II, Class 1
Medium	120 cps	0.005	7 seconds	5 seconds	Type II, Class 2
Thick	2400 cps	0.008	10 seconds	8 seconds	Type II, Class 3
Gel	>50,000 cps	0.010	30 seconds	20 seconds	Type II, Class 3
				*Fixture cure once pieces are assembled (Full cure is 8 hours)

Titebond® Instant Bond Activator (Heptane-based)
Activator	3 cps	Use with all Titebond Instant Bond Wood Adhesives

Yes, it can do that
And much more

Cyanoacrylates (CA) have traditionally been called super glues for their adhesion properties to several different materials and their effectiveness for unique applications.

Although Titebond Instant Bond Adhesives are specifically designed for wood and wood products, these superior formulations are also ideal for a wide variety of materials and applications.

Materials
• Acrylic • MDF • Chrome • Nylon • Brass	• Aluminum • Polyester • Porcelain • PVC • Fiberglass	• Natural rubber • Stainless steel • Wood products • Polystyrene • Granite

Wood Applications
• Hair-line cracks • Small defect repair • Wood finish / protectant • Miter joints (crown molding) • Wood knots and voids • Assembly of jigs and fixtures • Finish carpentry applications • MDF installation		• Chair repair (leg, spindle, etc.) • Soak end grain to prevent splitting • Pen making – decorative inlays • Granite countertop installation • Porous and odd-shaped surfaces • Model airplanes / crafts • Miniature moldings / trim • Gluing turning blocks to scrap